PHP 8.3.4 Released!

Les tableaux

  • Introduction
  • Installation/Configuration
  • Constantes pré-définies
  • Tri des tableaux
  • Fonctions sur les tableaux
    • array_change_key_case — Change la casse de toutes les clés d'un tableau
    • array_chunk — Sépare un tableau en tableaux de taille inférieure
    • array_column — Retourne les valeurs d'une colonne d'un tableau d'entrée
    • array_combine — Crée un tableau à partir de deux autres tableaux
    • array_count_values — Compte les occurrences de chaque valeur distincte dans un tableau
    • array_diff_assoc — Calcule la différence de deux tableaux, en prenant aussi en compte les clés
    • array_diff_key — Calcule la différence de deux tableaux en utilisant les clés pour comparaison
    • array_diff_uassoc — Calcule la différence entre deux tableaux associatifs, à l'aide d'une fonction de rappel
    • array_diff_ukey — Calcule la différence entre deux tableaux en utilisant une fonction de rappel sur les clés pour comparaison
    • array_diff — Calcule la différence entre des tableaux
    • array_fill_keys — Remplit un tableau avec des valeurs, en spécifiant les clés
    • array_fill — Remplit un tableau avec une même valeur
    • array_filter — Filtre les éléments d'un tableau grâce à une fonction de rappel
    • array_flip — Remplace les clés par les valeurs, et les valeurs par les clés
    • array_intersect_assoc — Calcule l'intersection de deux tableaux avec des tests sur les index
    • array_intersect_key — Calcule l'intersection de deux tableaux en utilisant les clés pour comparaison
    • array_intersect_uassoc — Calcule l'intersection de deux tableaux avec des tests sur les index, compare les index en utilisant une fonction de rappel
    • array_intersect_ukey — Calcule l'intersection de deux tableaux en utilisant une fonction de rappel sur les clés pour comparaison
    • array_intersect — Calcule l'intersection de tableaux
    • array_is_list — Vérifie si un array donné est une liste
    • array_key_exists — Vérifie si une clé existe dans un tableau
    • array_key_first — Récupère la première clé d'un tableau
    • array_key_last — Récupère la dernière clé d'un tableau
    • array_keys — Retourne toutes les clés ou un ensemble des clés d'un tableau
    • array_map — Applique une fonction sur les éléments d'un tableau
    • array_merge_recursive — Combine un ou plusieurs tableaux ensemble, récursivement
    • array_merge — Fusionne plusieurs tableaux en un seul
    • array_multisort — Trie les tableaux multidimensionnels
    • array_pad — Complète un tableau avec une valeur jusqu'à la longueur spécifiée
    • array_pop — Dépile un élément de la fin d'un tableau
    • array_product — Calcule le produit des valeurs du tableau
    • array_push — Empile un ou plusieurs éléments à la fin d'un tableau
    • array_rand — Prend une ou plusieurs clés, au hasard dans un tableau
    • array_reduce — Réduit itérativement un tableau
    • array_replace_recursive — Remplace récursivement dans le premier tableau les éléments des autres tableaux fournis
    • array_replace — Remplace les éléments d'un tableau par ceux d'autres tableaux
    • array_reverse — Inverse l'ordre des éléments d'un tableau
    • array_search — Recherche dans un tableau la première clé associée à la valeur
    • array_shift — Dépile un élément au début d'un tableau
    • array_slice — Extrait une portion de tableau
    • array_splice — Efface et remplace une portion de tableau
    • array_sum — Calcule la somme des valeurs du tableau
    • array_udiff_assoc — Calcule la différence entre des tableaux avec vérification des index, compare les données avec une fonction de rappel
    • array_udiff_uassoc — Calcule la différence de deux tableaux associatifs, compare les données et les index avec une fonction de rappel
    • array_udiff — Calcule la différence entre deux tableaux en utilisant une fonction rappel
    • array_uintersect_assoc — Calcule l'intersection de deux tableaux avec des tests sur l'index, compare les données en utilisant une fonction de rappel
    • array_uintersect_uassoc — Calcule l'intersection de deux tableaux avec des tests sur l'index, compare les données et les index des deux tableaux en utilisant une fonction de rappel séparée
    • array_uintersect — Calcule l'intersection de deux tableaux, compare les données en utilisant une fonction de rappel
    • array_unique — Dédoublonne un tableau
    • array_unshift — Empile un ou plusieurs éléments au début d'un tableau
    • array_values — Retourne toutes les valeurs d'un tableau
    • array_walk_recursive — Applique une fonction de rappel récursivement à chaque membre d'un tableau
    • array_walk — Exécute une fonction fournie par l'utilisateur sur chacun des éléments d'un tableau
    • array — Crée un tableau
    • arsort — Trie un tableau en ordre décroissant et conserve l'association des index
    • asort — Trie un tableau en ordre croissant et conserve l'association des index
    • compact — Crée un tableau à partir de variables et de leur valeur
    • count — Compte tous les éléments d'un tableau ou dans un objet Countable
    • current — Retourne l'élément courant du tableau
    • each — Retourne chaque paire clé/valeur d'un tableau
    • end — Positionne le pointeur de tableau en fin de tableau
    • extract — Importe les variables dans la table des symboles
    • in_array — Indique si une valeur appartient à un tableau
    • key_exists — Alias de array_key_exists
    • key — Retourne une clé d'un tableau associatif
    • krsort — Trie un tableau en fonction des clés en ordre décroissant
    • ksort — Trie un tableau en fonction des clés en ordre croissant
    • list — Assigne des variables comme si elles étaient un tableau
    • natcasesort — Trie un tableau avec l'algorithme à "ordre naturel" insensible à la casse
    • natsort — Trie un tableau avec l'algorithme à "ordre naturel"
    • next — Avance le pointeur interne d'un tableau
    • pos — Alias de current
    • prev — Recule le pointeur courant de tableau
    • range — Crée un tableau contenant un intervalle d'éléments
    • reset — Remet le pointeur interne de tableau au début
    • rsort — Trie un tableau en ordre décroissant
    • shuffle — Mélange les éléments d'un tableau
    • sizeof — Alias de count
    • sort — Trie un tableau en ordre croissant
    • uasort — Trie un tableau en utilisant une fonction de rappel
    • uksort — Trie un tableau par ses clés en utilisant une fonction de rappel
    • usort — Trie un tableau en utilisant une fonction de comparaison
add a note

User Contributed Notes 17 notes

up
103
applegrew at rediffmail dot com
15 years ago
For newbies like me.

Creating new arrays:-
//Creates a blank array.
$theVariable = array();

//Creates an array with elements.
$theVariable = array("A", "B", "C");

//Creating Associaive array.
$theVariable = array(1 => "http//google.com", 2=> "http://yahoo.com");

//Creating Associaive array with named keys
$theVariable = array("google" => "http//google.com", "yahoo"=> "http://yahoo.com");

Note:
New value can be added to the array as shown below.
$theVariable[] = "D";
$theVariable[] = "E";
up
19
Tyler Bannister
14 years ago
To delete an individual array element use the unset function

For example:

<?PHP
$arr
= array( "A", "B", "C" );
unset(
$arr[1] );
// now $arr = array( "A", "C" );
?>

Unlink is for deleting files.
up
6
macnimble at gmail dot com
14 years ago
Converting a linear array (like a mysql record set) into a tree, or multi-dimensional array can be a real bugbear. Capitalizing on references in PHP, we can 'stack' an array in one pass, using one loop, like this:

<?php
# array_stack()
# Original idea from:
# http://www.ideashower.com/our_solutions/
# create-a-parent-child-array-structure-in-one-pass/
function array_stack (&$a, $p = '@parent', $c = '@children')
{
$l = $t = array();
foreach (
$a AS $key => $val):
if (!
$val[$p]) $t[$key] =& $l[$key];
else
$l[$val[$p]][$c][$key] =& $l[$key];
$l[$key] = (array)$l[$key] + $val;
endforeach;
return
$a = array('tree' => $t, 'leaf' => $l);
}

# Example:
$node = array();
$node[1] = array('@parent' => 0, 'title' => 'I am node 1.');
# ^-----------------------v Link @parent value to key.
$node[2] = array('@parent' => 1, 'title' => 'I am node 2.');
$node[3] = array('@parent' => 2, 'title' => 'I am node 3.');
$node[4] = array('@parent' => 1, 'title' => 'I am node 4.');
$node[5] = array('@parent' => 4, 'title' => 'I am node 5.');

array_stack($node);

$node['leaf'][1]['title'] = 'I am node one.';
$node['leaf'][2]['title'] = 'I am node two.';
$node['leaf'][3]['title'] = 'I am node three.';
$node['leaf'][4]['title'] = 'I am node four.';
$node['leaf'][5]['title'] = 'I am node five.';

echo
'<pre>',print_r($node['tree'],TRUE),'</pre>';
?>

Note that there's no parameter checking on the array value, but this is only to keep the function size small. One could easily a quick check in there to make sure the $a parameter was in fact an array.

Hope you find it useful. Huge thanks to Nate Weiner of IdeaShower.com for providing the original function I built on.
up
3
webmaster at infoproducts dot x10hosting dot com
15 years ago
New value can also be added to the array as shown below.
$theVariable["google"] = "http//google.com";
or
$theVariable["1"] = "http//google.com";
up
0
dragos dot rusu at NOSPAM dot bytex dot ro
14 years ago
If an array item is declared with key as NULL, array key will automatically be converted to empty string '', as follows:

<?php
$a
= array(
NULL => 'zero',
1 => 'one',
2 => 'two');

// This will show empty string for key associated with "zero" value
var_dump(array_keys($a));

// Array elements are shown
reset($a);
while(
key($a) !== NULL )
{
echo
key($a) . ": ".current($a) . "<br>";// PHP_EOL
next($a);
}

// Array elements are not shown
reset($a);
while(
key($a) != NULL ) // '' == null => no iteration will be executed
{
echo
key($a) . ": ".current($a) . "<br>";// PHP_EOL
next($a);
}
up
-3
web at houhejie dot cn
6 years ago
string2array($str):

$arr=json_decode('["fileno",["uid","uname"],"topingid",["touid",[1,2,[3,4]],"touname"]]');
print_r($arr);

output:
Array ( [0] => fileno [1] => Array ( [0] => uid [1] => uname ) [2] => topingid [3] => Array ( [0] => touid [1] => Array ( [0] => 1 [1] => 2 [2] => Array ( [0] => 3 [1] => 4 ) ) [2] => touname ) )

when I hope a function string2array($str), "spam2" suggest this. and It works well~~~hope this helps us, and add to the Array function list
up
-1
andyd273 at gmail dot com
15 years ago
A small correction to Endel Dreyer's PHP array to javascript array function. I just changed it to show keys correctly:

function array2js($array,$show_keys)
{
$dimensoes = array();
$valores = array();

$total = count ($array)-1;
$i=0;
foreach($array as $key=>$value){
if (is_array($value)) {
$dimensoes[$i] = array2js($value,$show_keys);
if ($show_keys) $dimensoes[$i] = '"'.$key.'":'.$dimensoes[$i];
} else {
$dimensoes[$i] = '"'.addslashes($value).'"';
if ($show_keys) $dimensoes[$i] = '"'.$key.'":'.$dimensoes[$i];
}
if ($i==0) $dimensoes[$i] = '{'.$dimensoes[$i];
if ($i==$total) $dimensoes[$i].= '}';
$i++;
}
return implode(',',$dimensoes);
}
up
-1
sunear at gmail dot com
14 years ago
Made this function to delete elements in an array;

<?php

function array_del_elm($input_array, $del_indexes) {
if (
is_array($del_indexes)) {
$indexes = $del_indexes;
} elseif(
is_string($del_indexes)) {
$indexes = explode($del_indexes, " ");
} elseif(
is_numeric($del_indexes)) {
$indexes[0] = (integer)$del_indexes;
} else return;
$del_indexes = null;

$cur_index = 0;
if (
sort($indexes)) for($i=0; $i<count($input_array); $i++) {
if (
$i == $indexes[$cur_index]) {
$cur_index++;
if (
$cur_index == count($indexes)) return $output_array;
continue;
}
$output_array[] = $input_array[$i];
}
return
$output_array;
}

?>

but then i saw the methods of doing the same by Tyler Bannister & Paul, could see that theirs were faster, but had floors regarding deleting multiple elements thus support of several ways of giving parameters. I combined the two methods to this to this:

<?php

function array_del_elm($target_array, $del_indexes) {
if (
is_array($del_indexes)) {
$indexes = $del_indexes;
} elseif(
is_string($del_indexes)) {
$indexes = explode($del_indexes, " ");
} elseif(
is_numeric($del_indexes)) {
$indexes[0] = (integer)$del_indexes;
} else return;
unset(
$del_indexes);

for(
$i=0; $i<count($indexes); $i++) {
unset(
$target_array[$indexes[$i]]);
}
return
$target_array;
}

?>

Fast, compliant and functional ;)
up
-3
justin at jmfrazier dot com
4 years ago
Using null as the key when setting an array value is NOT the same as using empty [].
<?php
$null
= null;
$testArray = [];
$testArray[$null] = 1;
$testArray[$null] = 2;
$testArray[$null] = 3;
$testArray[$null] = 4;
var_dump($testArray);
?>
Output:
array(1) {
'' =>
int(4)
}

<?php
$testArray
= [];
$testArray[null] = 1;
$testArray[null] = 2;
$testArray[null] = 3;
$testArray[null] = 4;
var_dump($testArray);
?>
Output:
array(1) {
'' =>
int(4)
}

<?php
$testArray
= [];
$testArray[] = 1;
$testArray[] = 2;
$testArray[] = 3;
$testArray[] = 4;
var_dump($testArray);
?>
Output:
array(4) {
[0] =>
int(1)
[1] =>
int(2)
[2] =>
int(3)
[3] =>
int(4)
}
up
-4
info at curtinsNOSPAMcreations dot com
13 years ago
Another way to create a multidimensional array that looks a lot cleaner is to use json_decode. (Note that this probably adds a touch of overhead, but it sure does look nicer.) You can of course add as many levels and as much formatting as you'd like to the string you then decode. Don't forget that json requires " around values, not '!! (So, you can't enclose the json string with " and use ' inside the string.)

As an example:

<?php
$myarray
['blah'] = json_decode('[
{"label":"foo","name":"baz"},
{"label":"boop","name":"beep"}
]'
,true);

print_r($myarray)
?>
returns:

Array
(
[blah] => Array
(
[0] => Array
(
[label] => foo
[name] => baz
)

[1] => Array
(
[label] => boop
[name] => beep
)
)
)
up
-6
contact at greyphoenix dot biz
15 years ago
<?php
//Creating a multidimensional array

$theVariable = array("Search Engines" =>
array (
0=> "http//google.com",
1=> "http//yahoo.com",
2=> "http//msn.com/"),

"Social Networking Sites" =>
array (
0 => "http//www.facebook.com",
1 => "http//www.myspace.com",
2 => "http//vkontakte.ru",)
);

echo
"The first array value is " . $theVariable['Search Engines'][0];
?>

-- Output--
The first array value is http://google.com
up
-7
Anonymous
15 years ago
@jorge at andrade dot cl
This variant is faster:
<?php
function array_avg($array,$precision=2){
if(!
is_array($array))
return
'ERROR in function array_avg(): this is a not array';

foreach(
$array as $value)
if(!
is_numeric($value))
return
'ERROR in function array_avg(): the array contains one or more non-numeric values';

$cuantos=count($array);
return
round(array_sum($array)/$cuantos,$precision);
}
?>
up
-7
thomasdecaux at ebuildy dot com
14 years ago
To browse a simple array:

<?php

foreach ($myArray AS $myItem)
{

}

?>

To browse an associative array:

<?php

foreach ($myArray AS $key=>$value)
{

}

?>

http://www.ebuildy.com
up
-7
gratcypalma at gmail dot com
10 years ago
<?php
function foo() {
return array(
'name' => 'palma', 'old' => 23, 'language' => 'PHP');
}
/* 1. PHP < 5.4.0 */
$a = foo();
var_dump($a['name']);

/* 2. Works ini PHP >= 5.4.0 */

var_dump(foo()['name']);

/*
When i run second method on PHP 5.3.8 i will be show error message "PHP Fatal error: Can't use method return value in write context"

http://www.php.net/manual/en/migration54.new-features.php
*/
up
-8
spereversev at envionsoftware dot com
11 years ago
<?php
function array_mask(array $array, array $keys) {
return
array_intersect_key( $array, array_fill_keys( $keys, 0 ) );
}
?>

Might be helpful to take a part of associative array containing given keys, for example, from a $_REQUEST array

array_mask($_REQUEST, array('name', 'email'));
up
-19
Jack A
15 years ago
Note that arrays are not allowed in class constants and trying to do so will throw a fatal error.
up
-25
John Marc
14 years ago
Be careful when adding elements to a numeric array.
I wanted to store some info about some items from a database and decided to use the record id as a key.

<?php
$key
=3000000000;
$DATA[$key]=true;
?>

This will create an array of 30 million elements and chances are, you will use up all memory with these 2 lines

<?php
$key
=3000000000;
$DATA["$key"]=true;
?>

This on the other hand will force the array to be an associative array and will only create the one element
To Top